Aluminium spacer slit machine
Product Introduction
The machine is used to cut the rolled aluminum strip lengthwise into narrow strip and recoil it.
MATERIAL PARAMETERS:
Raw materials, aluminum alloy, steel hard and soft foil materia | |
Raw material specification, material thickness | 0.1 ~ 0.5 mm |
Material maximum width | 600 mm |
Coil core diameter | entry ID 152 &508 /Rewind 305 mm coil core |
Maximum diameter | 1300 MM |
Coil plate type | ≤40 |
Coil weight(Max) | ≤3 t finished product |
Maximum width | 600 mm Max 20 cut and Minim slit width 16mm .shearing |
Trimming Width(min / Max) | single side 3 ~ 7 mm finished product |
Maximum outer diameter | 305 mm ~ 1200 mm coil core OD (Max) |
Tower tolerance | ≤0.2 mm |
Length accuracy | ≤ 1‰ |
SURFACE QUALITY:
No change of surface quality after passing through train. | |
Mechanical performance roll width | 700mm |
Uncoiler centering adjustment | 150MM |
BELT-PIERCING:
Manual cutting mode | hob |
Shear maximum speed | 0.1 ~ 0.5200M / Min |
Shear Minimum Speed | 10m / Min |
Scrap Processing Mode | winding uncoiling |
Tension range | 600-800N |
Coiling tension range | 28l-3600n |
Total power | about 70KW(60% renewable energy utilization) |
Total equipment weight | about 12 tons |
Write your message here and send it to us