Aluminum Coil
-
High Quality 3003 Aluminum Coil Made In China
3004 aluminum foil has high hardness, great burden bearing and preferable stepping impact over 3003 aluminum foil. It very well may be applied to Aluminum Foil Container
what’s more the items are protected and clean. As one of 3004 aluminum foil makers, Yutwin Aluminum produces 3004 Aluminum Foil Container items with great shape, no dark wire, no brilliant wire, no pinhole numerous benefits, superior grade and low cost.
-
China Manufacture Supplier 3004 Aluminum Coil
3004 aluminum alloy is an alloy in the wrought aluminum-manganese family (3000 or 3xxx series).
It is similar to the 3003 alloys, except for the addition of approximately 1% magnesium. It can be cold worked (but not, unlike some other types of aluminum alloys, heat-treated) to produce tempers with higher strength, but a lower ductility.
Like most other aluminum-manganese alloys, 3004 is a general-purpose alloy with moderate strength, good workability, and good corrosion resistance.
It is commonly rolled and extruded (used in the making of beverage cans), but typically not forged. As a wrought alloy, it is not used in casting.
-
High Quality 3105 Aluminum Coil Made In China
3105 aluminum coil is a common profound drawn material. The aluminum content depends on 98%, which can have a place with the classification of unadulterated aluminum combination, which is somewhat more grounded than the 1 series coil with aluminum content of around almost 100%. Additionally, 3105 aluminum coil can’t be reinforced by heat treatment, however its erosion obstruction, formability and welding properties are likewise great.
-
High Quality 5754 Aluminum Coil Made In China
5754 aluminum curl is a 5 series Al-Mg amalgam, which is likewise a non-heat-treated combination. It takes on cool handling to work on its mechanical properties. The medium-strength 5754 aluminum curl enjoys the benefits of good consumption opposition, weldability and simple handling and framing, and has turned into the principle material utilized in car fabricating industry (vehicle rooftop, base plate, entryway, shape, seal), canning industry, fast rail commotion hindrance, high-grade compound entryways and windows.
-
5052 H34 Aluminum Alloy Manufacturer
5052 H34 aluminum means that 5052 aluminum alloy undergoes low-temperature treatment or heating after work hardening, to obtain stable performance under h34 temper. At this time, the hardness level is 4. So, 5052 h34 aluminum properties show high workability, excellent surface treatment effect, and good weldability.
-
High Quality 1050 Aluminum Coil Made In China
1050 pure aluminum coil belongs to 1000 series aluminum coil, which is commercially pure wrought family with a purity of 99.5% Al. It also belongs to 1000 series aluminum alloy, which has better correction resistance than other alloy series. In the 1050 aluminum coil, in addition to the component Al, 0.4% Fe is added, so 1050 aluminum alloy also has high conductivity.
-
1060 Aluminum Alloy Manufacturer
1060 aluminum coil belongs to 1000 series aluminum coil, 1060 aluminum alloy is aluminum content (mass fraction) of 99.60%, not heat treatment to strengthen. Pure aluminum surface is silvery white, its density decreases with increasing purity or temperature. 1060 aluminum production process is relatively simple, relatively mature technology, the price relative to other high-grade aluminum alloy to be much cheaper.
-
6061 Aluminum Alloy Manufacturer
6061 aluminum alloy after heat treatment the pre-tension technology production of high quality aluminum alloy products, its strength is not compared with 2 or 7 XXX XXX department system, but its more magnesium, silicon alloy properties, has the excellent processing performance, excellent welding characteristics and electroplating, good corrosion resistance, high toughness and processing after deformation, dense material without defects and easy polishing, coloring film easily, good features such as oxidation excellent results.
-
5083 Aluminum Alloy Manufacturer
5083 aluminum coil is a high magnesium alloy with traces of manganese and chromium is known for exceptional performance in extreme environments. 5083 aluminum coil is highly resistant to attack by both seawater and Industrial chemical environments.
Aluminium alloy 5083 contains 5.2% magnesium, 0.1% manganese and 0.1% chromium. In the tempered condition, it is strong, and retains good formability due to excellent ductility. 5083 has high resistance to corrosion, and is used in marine applications. It has the low density and excellent thermal conductivity common to all aluminium alloys.
-
China Manufacture Supplier 1100 Aluminum Coil
1100 aluminium coil is pure aluminium, with excellent forming characteristics. 1100 is a typical industrial pure aluminum (99.00% of aluminum), and cannot be heat treated. The Aluminum 1100 coils are sensitive to high temperatures ranging between 200 and 250°C, but the strength of the coils can be increased at subzero temperatures. CHAL will supply superior quality aluminum 1100 coil at, a reasonable price with ASTM-B-209M, BS EN 485-2, BS EN 573-3, GB/T3880-2008 standard guaranteed.
-
Aluminium spacer slit machine
Alloy 1100 3003 H18
0.18mm 0.2mm 0.3mm with 18mm to 40mm
